Strip Plank Canoe @ bujire38

Strip Plank Canoe In a bid to get the hull finished I checked the humidity and temperature in the workshop to see if I could crack on with the epoxy/glass cloth stage. Fitting the strips went really smoothly, with the final closing strips going in without drama.14` Strip plank canoe update 2. It has to go on hold for a month or so and leave the workshop temporarily to make way for another project... The outside sanded fairly easily thanks to being able to maintain a decent temperature and& . I went through the same procedure of tack clothing the surface, getting the& .

strip plank canoe This week I have found time to get some canoe work done.14` Strip plank canoe update. At last the canoe is finished and ready for someone to enjoy. Any spare time has been devoted to it to keep it progressing before the weather turns truly cold..14` Strip plank canoe sheathing...

14` Strip plank canoe sheathing..... I used the same 200g/m cloth as the outside. 22 foot, 1918 St Lawrence Guide Boat equipped with an early four cylinder Brennan engine manufactured in Syracuse New York, and a 22 foot square stern cedar strip& . This weekend I decided to epoxy/glass the inside of the canoe.

I used the same 200g/m cloth as the outside. 22 foot, 1918 St Lawrence Guide Boat equipped with an early four cylinder Brennan engine manufactured in Syracuse New York, and a 22 foot square stern cedar strip& . This weekend I decided to epoxy/glass the inside of the canoe... The seats have laminated ash supports and are scalloped in& ..14` Strip plank canoe final update. Although I must admit I really like it and it just fits inside my garage if I were to keep it! I took some pics and video clips to promote&

The seats have laminated ash supports and are scalloped in& ..14` Strip plank canoe final update. Although I must admit I really like it and it just fits inside my garage if I were to keep it! I took some pics and video clips to promote& . The hygrometer showed 97% and the& . In a bid to get the hull finished I checked the humidity and temperature in the workshop to see if I could crack on with the epoxy/glass cloth stage. Fitting the strips went really smoothly, with the final closing strips going in without drama.14` Strip plank canoe update 2. It has to go on hold for a month or so and leave the workshop temporarily to make way for another project

In a bid to get the hull finished I checked the humidity and temperature in the workshop to see if I could crack on with the epoxy/glass cloth stage. Fitting the strips went really smoothly, with the final closing strips going in without drama.14` Strip plank canoe update 2. It has to go on hold for a month or so and leave the workshop temporarily to make way for another project... The outside sanded fairly easily thanks to being able to maintain a decent temperature and& . I went through the same procedure of tack clothing the surface, getting the& .